Your Best Source For
Farm & Ranch Attachments
Your Price
$319.97
ITEM SOLD OUT. Item will be back soon. To further inquire about the item, please contact us at 1- 800 717 3540.
Share With Friends
Description:
Heavy Bolt On Tooth Bar For Skid Steer and Front End Loader Buckets
Tooth Bar can be easily installed inside of a bucket. It is used tremendously for all kinds of digging conditions. Perfect for soil and gravel renovation
Features:
- 69-1/2 in Wide Bolt On Heavy Bucket Tooth Bar |
- Good For Loader Buckets With Inside Size 69-1/2 in. to 70-1/4 in. |
- Number of Teeth - 8 | Gap space between teeth - 9-1/4 In. | Shank Width - 1.1/8 in. | Tooth Width -1.3/4 in. |
- Positive mounting with side bolts, no chance of loosing tooth bar in the dirt while working | Included - 5/8" Bolts Nuts & Spacers |
- Teeth Made of High Quality Carbon Steel and Heat Treated. Replaceable Tips on each tooth
ASK FOR CUSTOM SIZES / SIZES NOT LISTED.
Shipping:
Free Shipping in lower 48 US States.
Ships in 1-2 business days.
Estimated delivery time 2-7 business days.
Specifications:
| Brand Name | Neat Attachments |
|---|---|
| Manufacture Name | Neat Attachments |
| UPC | 610446716009 |
Advertisement |
-
Answer:
-
If your cutting edge is more than 3/4 inch, 2AW toothbar will not fit.
By seller on 2018-Jan-02
-
Answer Here
-
If your cutting edge is more than 3/4 inch, 2AW toothbar will not fit.
-
Answer:
-
Tooth bar size should be 1/16" - 3/4" less than the inside size of your bucket. There are spacers comes with toothbar to fill gap. Actual size of this tooth bar is little less than 34-1/2".
By seller on 2017-Jun-26
-
Answer Here
-
Tooth bar size should be 1/16" - 3/4" less than the inside size of your bucket. There are spacers comes with toothbar to fill gap. Actual size of this tooth bar is little less than 34-1/2".
Ships in 1-2 business days.
Estimated delivery time 2-7 business days.
Advertisement |
Review By:
Robert D
Posted On:
Fri, 02 Dec 2022
Ratings:
Subject:
Tooth bar works well
Review:
Easy installation with two bold holes in side of bucket of a 50hp 4wd tractor. Initially, I was concerned because one of the tooth welds was angled low, leaving one tooth tip about an inch lower than the rest. Could not get through to Neat Acustomer support. But I needed to fill the manure spreader with the manure from 100 sheep so went ahead. The toothbar is fantastic, solid, I can scrape with it and it holds tight against the edge of the bucket.
Comment
Review By:
Blake L
Posted On:
Sun, 28 Mar 2021
Ratings:
Subject:
Tractor implement
Review:
GOOD PURCHASE
WORKS
Review By:
David H
Posted On:
Wed, 09 Oct 2024
Ratings:
Subject:
46" tooth bar
Review:
For the price it works, teeth not straight, pattern cuts on metal pieces not consistant, would be better with 2 more teeth, but like I said for half the price of others it works
Review By:
Randall J
Posted On:
Mon, 16 Oct 2023
Ratings:
Subject:
So far, so good!
Review:
While the teeth were not welded to the bar particularly straight, it hasn't impact performance and overall this is a solid and easy to install tooth bar that has performed well digging up tough Upstate NY clay and tree roots. It was also the lowest cost option available for my compact tractor. The person I spoke with over the phone was very helpful, and the bar itself arrived within a couple days of my ordering. Overall 4.5 stars and recommended...thank you Neat team!
Review By:
David W
Posted On:
Wed, 09 Dec 2020
Ratings:
Subject:
Helpful tool, a real game-changer!
Review:
It fit right on my LA-302 loader on a Kubota B7500. Pushed up piles of blackberries after mowing. Excellent at digging the rock in the driveway for reshaping. Easier digging dirt from a pile. Couldn’t break it digging a large rock! Did not like that one tooth that wasn’t fully seated before being pinned, I’ll fix it if it fails. It’d be a five-star otherwise.
